| PMT Engineers are in to the business of fluid process components. The complete range of pressure gauge accessories used for different applications includes: |
| Gauge Cock |
- Material used : Brass / Stainless Steel.
- Type : 2 way and 3 way.
- Working pressure up to 2,000 PSI.
- Sizes : 1/8" to 1/2".
|
|
 |
|
|
|
| Gauge Saver |
|
|
- Material used : Stainless Steel.
- Used where the line pressure is likely to exceed than maximum range of instrument and protecting gauges from over range pressure.
- Sizes : 1/4",3/8", 1/2" screwed MF/BSP/BSPT/NPT/ Flanged end connection.
|
|
 |
|
|
|
| Pulsation Dampners |
|
|
 |
- Material used : Brass / Stainless Steel / Carbon Steel.
- Working pressure up to 10,000 PSI.
- Used when the gauge is subjected to rapid pressure fluctuations.
- Sizes : 1/8" to 1/2".
|
|
|
|
| Syphon |
| Pigtail & 'U' tube used on pressure gauges and process taping to prevent steam and coming in direct contact with the instrument.
- Material used : Carbon Steel / Stainless Steel.
- End Connection : Threaded, Welded or Combination
- Sizes : 14" to 1/2" heavy thick wall seamless tube for high pressure.
|
|
 |
|
|
|
| Condensate Pot |
|
|
| PMT following AISIB 31.1 standard 2,3,4 sch 40,80 & 160 used in steam metering lines to cold and condensate steam and maintain a constant liquid head above instruments.
- Material used : Carbon Steel / Stainless Steel / Alloy Steel etc.
- End Connection : S/W, Threaded etc.
|
|
 |
|
|
|
| Thermowells |
|
|
PMT following AISIB 31.1 standard 2,3,4 sch 40,80 & 160 used in steam metering lines to cold and condensate steam and maintain a constant liquid head above instruments.
- Material used : Carbon Steel / Stainless Steel / Alloy Steel etc.
- End Connection : S/W, Threaded etc.
|
|
 |
| |
|
|
| |
|
|
